A break out race is similar to bracket racing (drag racing). We will set a minimum lap time that is around the average lap time for most racers. If your car is to fast the lap will not count. The second time around it will count your lap. You either race a car that can do the average lap time or you race a car that can do 2 laps to count the 1 lap average lap time.
Minimum lap time is; 7.00
Racers will be penalized if you stop on the track or intentenally slow down before the lite bridge.
Running Track: Scalextric
- Race Duration: plan on 3 minutes per lane, could change at race time.
- Chassis: Modifications permitted, No metal chassis.
- Body: 1/32 hard plastic body, Custom paint schemes permitted.
- Gears: Modifications permitted (only 1/32 parts allowed).
- Bushings: Modifications permitted (only 1/32 parts allowed).
- Wheels/Axles: Modifications permitted (only 1/32 parts allowed).
- Tires: any, NO tire treatments permitted.
- Electrical: May add Head/Tail Lights, wires may be changed, Motor/Electrical noise suppression devices may be removed.
- Magnet or magnet free: only 1/32 magnets allowed up to 3 magnets inside of chassis.
- Motor(s): any 1/32 motor allowed.
- Weight: Additional weight may be added to the inside of the chassis only (NO weight may be attached to the underside of the chassis).
- Vehicle Ground Clearance: 1mm (.040”)
- Guide Blade/Braid: Any 1/32 guide blade permitted, spring (if any) may be modified and/or removed, any manufactures’ braid material permitted.
- Additional Notes: Rules may change, keep in touch.
XML Feeds
