Rules & Results

Approved cars:
- NINCO: Renault Megane (new type)
- Running Track: NINCO
- Running Voltage: 12v
- Race Duration: plan on 4 minutes per lane, could change at race time.
- Chassis: NO modifications permitted, may substitute ProRace Lexan chassis.
- Body: Custom paint schemes permitted (Note: body must remain as produced by manufacture, however additional details such as roll bars, scoops, etc. may be added where prototypical, bodies with lightweight interior are permitted).
- Gears: Modifications permitted (only NINCO parts allowed).
- Bushings: Modifications permitted (only NINCO parts allowed).
- Wheels/Axles: Modifications permitted (only NINCO parts allowed).
- Tires: Ninco, NO tire treatments permitted.
- Electrical: May add Head/Tail Lights, wires may be changed, Motor/Electrical noise suppression devices may be removed.
- Magnet: None (magnet free).
- Motor(s): NINCO NC-5 only, FK-180, 19,045 RPM @ 12VDC, 284 gcm @ 12VDC
Motor must be un-modified, have undamaged metal tabs, and OEM wrapper where applicable.
- Tape or a minimal amount of glue may be used to secure the motor in place, however not in excess such as to add weight or stiffen the chassis.
- Weight: Additional weight may be added to the inside of the chassis only (NO weight may be attached to the underside of the chassis).
- Vehicle Ground Clearance: 1mm (.040”)
- Guide Blade/Braid: Any NINCO guide blade permitted, spring (if any) may be modified and/or removed, any manufactures’ braid material permitted.
- Additional Notes: Only NINCO 2.5mm parts may be used.